The model 7707ADVT is Analog or SDI video card with 4 channel analog or AES audio fiber transmitter. Auto-sensing (analog or digital) video and audio inputs. Supports both NTSC and PAL analog or 4:2:2 component digital video. Supports single-mode and multi-mode fiber optic cable Optical output wavelengths at 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU G 694.2 compliant). Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required. Audio de-embedding capability for digital video and Analog or AES Audio. Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®.
Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals
Auto-sensing (analog or digital) video and audio inputs
Supports both NTSC and PAL analog or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
Supports 32, 44.1, 48kHz AES audio inputs
Dolby E compatible
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Audio de-embedding capability for digital video and Analog or AES Audio
-NF version converts input video & audio to a 270Mb/s copper output to interface with any SD-SDI or other 270Mb/s service
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Adjustable gain equalization for analog video for up to 250m of Belden 1694A coaxial cable
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths at 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU G 694.2 compliant)
DWDM wavelengths also available (ITU G.694.1 compliant)
Outputs available with fiber optics and BNC or BNC's only (-NF version)
Passes embedded and/or external audio for digital video
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - multi-rate SDI
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Certifications:
FCC
Active Power:
18 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
EU EMC
7707ADVT-HD
- Analog/SDI/HD-SDI Video Card with 4 Channel Analog or AES Audio Fiber Transmitter