Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 2406LR-B50

L-Band/Wideband Standalone Fiber Receiver, 50ohm BNC Connectors

Model: 2406LR-B50

Mounts directly to the antenna structure or other outdoor locations
-WP option provides a weatherproof version of the product
Wide bandwidth allows use with L-Band, over-the-air DTV and other frequency ranges
Protocol independent design – passes all modulation formats
Dual, full power outputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 2406LR-B50 is a fiber optic receiver for signals in the satellite L-Band and other frequency ranges. It accepts a single fiber optic input on an FC/APC connector and provides a pair of equal power electrical outputs. Packaged in a small, standalone enclosure, the 2406LR is temperature-hardened and ideal for mounting on or near antenna structures, or in any application where modular/rack-mount products are not practical. The –WP version features dust and water protection for direct outdoor mounting without a secondary enclosure. When combined with the 2408LT a bi-directional link can be created, ideal for VSAT and similar applications.

Mounts directly to the antenna structure or other outdoor locations
-WP option provides a weatherproof version of the product
Wide bandwidth allows use with L-Band, over-the-air DTV and other frequency ranges
Protocol independent design – passes all modulation formats
Dual, full power outputs
Tri-color LED status indicators for optical input, DC input and RF output levels
Flexible powering options including power brick (+PS option), 2400PSU-8 or customer's own 11-20V DC source
Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues
Fiber transport offers increased signal quality over coax at longer distances and is not prone to high-frequency rolloff
Applications
L-Band over fiber transport to L-Band upconverter for uplinks
VSAT and other bi-directional signals
Portable antenna deployment
Any RF fiber receive application requiring a standalone device

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): -4 F
Height: 1.20 in
Width: 2.40 in
Regulatory Compliance: IP65 compliant
DC Voltage: 18 Volts
RF Outputs Number of Outputs: 2
RF Outputs Connector: F-Type (50ohm BNC optional)
RF Outputs Conductor Range: 23-18 AWG (0.26-0.82 mm2)
RF Outputs I/O Impedance: 75 ohm (50ohm optional)
Frequency Range 2406LR: 120MHz - 3GHz
Frequency Range 2406LR-H: 120MHz - 2.3GHz
Frequency Range Return Loss: 120MHz to 2.3GHz > 15dB
Frequency Range: 2.3GHz to 3GHz > 12dB
Frequency Range Output IP3: +28 dBm
IMD: < -55dBc at -3dBm output and 25dB gain
Output Signal Level Manual Gain: 0 to -60 dBm (depending on input signal level, gain setting and optical loss)
Output Signal Level AGC mode: -10 to -40 dBm (adjustable, maintainable within available gain range)
Output Signal Level Available Gain: -6dB to +24dB in 2dB steps
Optical Input Number of Inputs: 1
Optical Input Connector: Female FC/APC
Optical Input Operating Wavelength: 1270nm-1610 Nm
Maximum Input Power 2406LR: +3dBm
Maximum Input Power 2406LR-H: -7dBm
Optical Sensitivity 2406LR: -14dBm @ 35dB C/N on a 36MHz carrier
Optical Sensitivity 2406LR-H: -20dBm @ 35dB C/N on a 36MHz carrier
DC Input Voltage: +18V DC nominal, +11V DC to +20V DC range
DC Input Connector: F-Type
DC Input Conductor Range: 23-18 AWG (0.26-0.82 mm2)
Length: 5.40 in
Dust and water protection: IP65 compliant (-WP version only)
Rackmountable: Yes

L-Band/Wideband Standalone Fiber Receiver 59 kb - Data Sheet

Project List

Find a Dealer