Test & Measurement Equipment : Signal Generators : ESE - DV-321

Genlockable HD/SD Sync Generator

Model: DV-321

SD/HD Genlock Input
4 HD Sync Outputs (BNC)
2 SD Composite Color Black/Color Bar outputs
AES11 Output - Tone or Silent
Wordclock Output (48 KHz)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The DV-321 is an HD/SD Sync Generator with a genlock input. The genlock input accepts tri-level or bi-level signals. The DV-321 provides four HD sync outputs. These outputs produce an HD tri-level sync output. Eighteen HD output formats are supported on the DV-321. Also provided are two SD composite sync outputs that can be switched between color black or color bars. An AES11 output and a Wordclock output are also standard features of the DV-321. The AES11 output may be switched between silent and tone modes. All outputs are provided on rear panel BNC connectors. Front panel dip switches allow the user to configure the various outputs.

SD/HD Genlock Input
4 HD Sync Outputs (BNC)
2 SD Composite Color Black/Color Bar outputs
AES11 Output - Tone or Silent
Wordclock Output (48 KHz)
18 HD Formats
Product Options:
DC---DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
P2---Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
XLR---XLR Connector: The AES audio BNC connector is replaced with an XLR connector.