hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
ESE - DV-229

HD/SD SDI Pattern Generator

Model: DV-229

  • Audio: Embeds 500Hz or 1000Hz audio tone. Embeds audio tones on 1-8 channels of audio (Groups 1 and 2). Embeds audio tones @ 48000 Kbps
  • Motion: Square, Inverse Square, Full Motion
  • Time Code: RP188 Insertion, DVITC insertion (SD Formats Only), Drop Frame and Non Drop Frame Modes, Time Burn Window with settable position
  • Text Burn: Insertion of 32 characters of text, Front panel selection of Text and Position
  • SMPTE 352M Insertion
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The DV-229 is an HD/SD SDI Pattern Generator. The DV-229 offers two identical rear-mounted BNC outputs. A front panel LCD and pushbuttons allow for quick and easy setup. Alternatively, a software control panel and USB port may be used to configure the unit. Color bars as well as many other patterns are supplied. RP-188 and Closed Caption insertion, Embedded Audio Tones and onscreen Time Code/User Text insertion are also supported.
  • Audio: Embeds 500Hz or 1000Hz audio tone. Embeds audio tones on 1-8 channels of audio (Groups 1 and 2). Embeds audio tones @ 48000 Kbps
  • Motion: Square, Inverse Square, Full Motion
  • Time Code: RP188 Insertion, DVITC insertion (SD Formats Only), Drop Frame and Non Drop Frame Modes, Time Burn Window with settable position
  • Text Burn: Insertion of 32 characters of text, Front panel selection of Text and Position
  • SMPTE 352M Insertion
  • CEA-608 Closed Caption Insertion
  • Settings can be stored in non-volatile memory
  • User control panel software via USB connector
  • Field Upgradable via USB connector
  • Product Options:
  • DC---DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
  • P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
  • P2---Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
  • UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
 
 

Suggested Products