BE 71-F is a dual rate 8 channel analog audio embedder/disembedder for 1.5Gbps HD video signals or for 270Mbps standard definition signals. The analog audio ports automatically configure as inputs or outputs depending if the module is configured as mux or demux. When configured as a mux, the it has one serial digital video input and eight analog audio inputs. The audio streams are embedded into the video stream. The output of the module is a digital stream that contains the original video and audio signals. When configured as a demux, audio signals present in the incoming video signal are extracted and delivered as analog audio. It includes an eight channel audio mixer with channel swap and shuffle capability that allows to completely re-arrange and re-mix audio channels. It provides precise control over audio level, with up to 12dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second.
Use with servers, workstations and satellite receivers
HD/SD audio embedder/disembedder
8 channel audio mixing
Adjustable delay
Optical output available
Passes embedded audio
De-embedder/Embedder Type - Analog Audio
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Number of Channels:
8
AC Voltage:
230 Volts
DC Voltage:
12 Volts
Depth:
5.50 in
Height:
0.80 in
Width:
5.63 in
Product Weight:
1 lbs
Warranty (Length/Type):
5 years
Serial Digital Input – Number:
1
Serial Digital Input – Type:
HD Serial Digital 1.485Gbps (SMPTE 274M, 292M or 296M) or SD Serial Digital 270Mbps (SMPTE 259M)
Serial Digital Input – Impedance:
75 ohms
Serial Digital Output – Number:
1
Serial Digital Output – Type:
HD Serial Digital 1.485Gbps (SMPTE 274M, 292M or 296M) or SD Serial Digital 270Mbps (SMPTE 259M)
Serial Digital Output – Impedance:
75 ohms
Analog Audio Input – Number:
8 (Selectable as inputs or outputs)
Analog Audio Input – Type:
Balanced
Analog Audio Input – Impedance:
>15 kohms
Analog Audio Input - Frequency response:
20Hz to 20kHz (±0.1dB)
Analog Audio Output – Number:
8 (Selectable as inputs or outputs)
Analog Audio Output – Type:
Balanced, transformerless
Analog Audio Output – Impedance:
30 ohms
Optical Output – Number:
1
Optical Output – Connector:
SC/UPC
Optical Output – Type:
SD (SMPTE 297M, optical equivalent of 259M), HD (SMPTE 274M or 296M)
Power:
12V, 8W, (100 to 230Vac modular power supply)
BE71
- 8 Channel HD/SD Analog Audio Embedder/Disembedder