The M-12 is the workhorse monitor in the EM Acoustics range. It is a compact, low profile floor monitor designed for any application where accurate artist reference is required. Originally developed in conjunction with Sound by Design in the UK, the M-12 is a perfect match for any monitoring application - it will reproduce the subtlest nuances of a classical performance, or rise up above the loudest guitar rig. Since its introduction in 2004, the M-12 has been used by many of the worlds’ top artists and in many top venues. The enclosure houses a reflex-loaded 4” (102mm) voice coil, 12” (305mm) waterproofed neodymium cone driver, matched via a signature EM Acoustics passive crossover to a 3” (76mm) diaphragm, 1.4” (36mm) exit neodymium HF compression driver coupled to a variable dispersion waveguide. This waveguide produces a coverage pattern of 90H x 40V at one metre, narrowing to 50H x 40V at three metres. This pattern gives a performer freedom of movement whilst minimizing spill into adjacent microphones. A common question is how a passive floor monitor can compare with the bi-amplified designs available today. The simple answer is that many months of research into passive technology have produced the M-12 circuitry, which is precisely matched to the loudspeaker drive units. The result is a stunning floor monitor with excellent gain before feedback which will outperform many bi-amplified designs – yet requiring only one amplifier channel and no external processing. The compact enclosure is constructed from premium 18mm (3/4”) multi-laminate Baltic Birch plywood - rebated, screwed and glued together for maximum strength. The enclosure is supplied as standard in black textured paint, however RAL colour matching and weather protection options are available. The enclosure is fitted with steel bar handles and rubber feet for stability on stage. Six (yes, six!) NL4 connectors are provided on the front and both ends of the enclosure for neat cable management. A foam backed hex-punched steel grille protects the front of the enclosure from damage and moisture ingress. The M-12 is available as either left or right-handed to create stage pairs. The M-12 requires a single amplifier channel, and should be used with professional power amplifiers capable of delivering 800-1000W RMS into an 8-ohm load. For optimal results, either the DQ Series Advanced System Amplifiers, or the AQ or AD Series amplifiers combined with DSC48 processors should be used.