The FDX3000 power control system combines the best of ETC and Transtechnik's market leading technology. It brings together proven German engineering for the dimmer rack, cooling system and power stage, and provides the highest degree of smooth dimming and fast changeover.
19-inch steel frame with side walls and rear wall
Sub-rack with output stages and dimmer processors mounted on swing frame; individual plug-in dimmers and processors can be replaced easily
Maximum of 2 CEM3 processors (redundancy) and 96 dimmers 2.5kVA (72 with RCBO), or 48 dimmers 5kVA, or 24 dimmers 10kVA, or mixed on request
Approximately 3kVA when all circuits are at full
16 bit-control for smooth continuous fades on fast-acting loads
10 standard curves; non-dim; custom curves; independently set per circuit
Low-noise rack operates at less than 55dBA at a distance of 1m
16-120 mm2 power input lugs (2 x 16-120mm2 or 95-250mm2 by request)
Group fuse per subrack 3 x fused 63A
Branch breaker per circuit: C13A for 2.5kVA, C25A for 5kVA, C50A for 10kVA
30mA RCD (residual current protection) per sub-rack by request (RCBO possible)
Top and bottom cable-entry feed (bottom standard)
Spring-loaded terminals 4mm2 for 2.5kVA, 10mm2 for 5kVA, 16mm2 for 10kVA