Microphones : Boundary Microphones : Electro-Voice - RE90HW

Condenser Cardioid Hanging Microphone, White

Model: RE90HW

RF Shield provides superior RFI/GSM shielding
Cardioid polar pattern
Non-reflecting black (RE90H) or low-gloss white (RE90HW) with matching cable
Shielded pre-amp is highly-resistant to electrical noise and radio frequency interference
25-ft. braided, shielded cable maintains microphone’s position (not rotation)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Condenser cardioid hanging microphone is designed specifically for applications where the condenser microphone needs to be suspended from above the sound source. It is ideal for theater, house of worship or any application where a small, high-quality mic needs to be heard but not seen.

RF Shield provides superior RFI/GSM shielding
Cardioid polar pattern
Non-reflecting black (RE90H) or low-gloss white (RE90HW) with matching cable
Shielded pre-amp is highly-resistant to electrical noise and radio frequency interference
25-ft. braided, shielded cable maintains microphone’s position (not rotation)
Three-pin male XLR-type output connector fits with female bulkhead XLR-type connector

Polar/Pickup Pattern - Cardiod
Microphone Type - Boundary
Microphone Type - Condenser
Microphone Type - Electret Condenser
Polar/Pickup Pattern - Half-cardiod
Microphone Connectivity - Wired
Spec Sheet available - Yes

Operating Temperature (Maximum): 165.20 F
Operating Temperature (Minimum): -20.20 F
Maximum Frequency Response (Bandwidth): 15 kHz
Maximum Frequency Response (Bandwidth): 15000 Hz
Minimum Frequency Response (Bandwidth): 75 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
Cable Length: 25 ft
Dynamic Range: 95 dB
Impedance: 200 ohm
connector type: 3-pin XLR
Case Material: Steel
MIC type: Hanging
Maximum Diameter: 0.51 in
Generation Element: Condenser, back-electret
Clipping Level (1% THD): >120 dB (SPL)
Sensitivity, Open Circuit Voltage, 1kHz: 25 mV/Pa
Phantom Power Requirements: 9 to 52 VDC
Current Consumption: <5 mA (with P48 supply)
Transducer Diameter: 0.4 in
Transducer Length: 1.45 in
Electronics Module Diameter: 0.75 in
Electronics Module: 3.7 in
Color: Low-gloss White
Shipping Weight: 1.12 lbs
Product Weight: 0.83 lbs

Hanging Microphone 328 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor