Microphones : Microphone Systems (Packages) : Earthworks, Inc. - M50mp

Matched pair of M50s in Wood box (mic clips & ADP1 adapter included)

Series: Measurement Series

Model: M50mp

Matched pair
50kHz flat frequency response
Ideally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely a
Our top of the line measurement microphone with extraordinary impulse response for those who have stringent requirements and demand the very best
Provides laboratory grade accuracy

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Earthworks has become the accepted standard for affordable, reliable reference and measurement microphones. These microphones are accurate in the time domain and frequency response. Earthworks measurement microphones are optimized for clean, very fast impulse performance to provide accurate wideband response. They have virtually no handling noise and are remarkably stable with respect to temperature and atmospheric conditions. Our M Series measurement microphones are used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others. All models are available in matched pairs. The M50 offers extended frequency response and extraordinary impulse response for the most challenging of measurement applications.

Matched pair
50kHz flat frequency response
Ideally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely a
Our top of the line measurement microphone with extraordinary impulse response for those who have stringent requirements and demand the very best
Provides laboratory grade accuracy
Improved version of the SMAARTMIC™ previously offered by EAW
Omnidirectional polar pattern
Flat frequency response, fast impulse response and exceptional polar characteristics
Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
Requires 48V Phantom Power
Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
Electronic Calibration File available
Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F) Made in USA
Made in USA

Microphone Connectivity - Wired
Microphone Type - Condenser
Microphone Type - Electret Condenser
Warranty - Yes
Polar/Pickup Pattern - Omnidirectional

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 14 F
Maximum Frequency Response (Bandwidth): 50000 Hz
Minimum Frequency Response (Bandwidth): 0 kHz
Impedance: 100 ohm
Maximum SPL (Sound Pressure Level): 142 dB
Sensitivity: -30.50 dBV
Wireless: No
Depth: 0.86 in
Height: 9 in
Color: Stainless
Noise: 22 dBA
Warranty (Length/Type): 15 Years
Mic Maximum Frequency Response: 50 kHz
Mic Maximum Frequency Response: 50000 Hz
Mic Minimum Frequency Response: 3 Hz
Mic Minimum Frequency Response: 0 kHz
Number of Mics Supplied: 2
Noise: 20 dB
Product Weight: 0.50 lbs
Minimum Frequency Response (Bandwidth): 3 Hz
Maximum Frequency Response (Bandwidth): 50 kHz
Signal to Noise Ratio: dB

ADP1 - 1/2" calibrator adapter for all M Series measurement mics

M23 - Omni Measurement Microphone - 9Hz to 23kHz (mic clip & ADP1 adapter included)

M23mp - Matched pair of M23s (mic clips & ADP1 adapter included)

M30 - Omni Measurement Microphone - 5Hz to 30kHz (mic clip & ADP1 adapter included)

M30BX - Battery Operated M30 w/built-in preamp - 9Hz to 30kHz (mic clip & ADP2 adapter included)

M30BXmp - Matched pair of M30BXs (mic clips & ADP2 adapter included)

M30mp - Matched pair of M30s (mic clips & ADP1 adapter included)

M50 - Omni Measurement Microphone - 3Hz to 50kHz (mic clip & ADP1 adapter included)

MC1 - Microphone Clip for QTC, TC, SR, P, DP & M Series mics (specify black or white)

OMW1 - Foam Teardrop Windscreen for QTC, TC & M Series Mics

Find a Dealer

Suggested Products

Biamp MRB-L-SCX400-T - Meeting room bundle; includes 1 Devio SCX 400, 1 Parle TTM-X (black), 1 Parle TTM-XEX (black), 1 AMP-450BP, 2 pair of Desono C-IC6 loudspeakers (white), (2) 25 ft plenum-rated Cat5e cable, (5) 10 ft (3m) plenum-rated Cat5e cable

by Biamp

Wireless table mic set (US)

by Sennheiser

Biamp MRB-M-SCX400-T - Meeting room bundle; includes 1 Devio SCX 400, 1 Parle TTM-X (black), 1 AMP-450BP, 1 pair of Desono C-IC6 loudspeakers (white), (2) 25' (7.5m) plenum-rated Cat5e cable, (3) 10' (3m) plenum-rated Cat5e cable

by Biamp