Broadcast quality frequency agile high definition clear QAM receiver demodulator with MPEG-2 HD/SD decoder (2.5-45 Mbps). Decodes DVB-ASI or IP and demodulates QAM 16, 64, 256 and converts it to SDI, HD-SDI, RGB, YPrPb, or composite output. transport streams Play out in HD or SD format. Optional secondary SD decoder with composite output only. Dolby AC-3 and MPEG audio decode with XLR connectors. Cost effective MPEG-2 decoder/receiver. Additional features include SNMP management. Upgrade to TLV300E-QAM™.
- Inputs: QAM (Annex B), DVB-ASI with automatic switchover from QAM to ASI in
- Optional second RF input port
- Supports SMPTE 2022 FEC on IP input
- Outputs: ASI, SDI or HD-SDI, Analog Component (YPbPr or RGB), Composite (NTSC or PAL), or IP (up to 4 IP transport streams out, SPTS or MPTS)
- Decodes and displays closed captioning (EIA 608 or EIA 708)
- Receives QAM signal via 75 ohm F-connector
- MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
- NTSC/PAL video output available
- 2 lines by 40 characters LCD display
- Down converts HD input to SD out for monitoring
- Front panel controls for fast setup
- Firmware upgradeable via internet or USB
- SNMP (10/100/1000 Base T Ethernet) management
- Easy-to-use Web-based GUI
- PSIP display – PAT, PMT, MGT, VCT, EIT, STT
- Also supports H.264 for future proofing
- Now supports AFD
- Also works as an HD decoder with:
- Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby Digital® AC-3, HE-AAC, and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
- Dolby® Pro Logic® compatible stereo audio output on one XLR connector and one D-sub 9P connector
- RGB video signal with 1080i/720p/480p/480i video mode
- Applications:
- Off air QAM receiver
- MPEG-2 HD or SD Decoder
- Upgrade from TLV300E-QAM
- Content repurposing
