The Zum® wired ZUMNET-DIN-16A-LV provides 0-10V dimming for drivers and devices. The device can be wired to Zum devices for network expansion and to Zum Link devices for in-room control. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, and centralized monitoring and management. Room setup can be accomplished quickly through the Zum app.
Zum Net Wired Technology
In a Zum network, Zum Net load controllers facilitate communications between rooms via Ethernet and can be daisy-chained for network expansion. Each device in the chain communicates to a Zum Hub control system for centralized monitoring, management, and reporting. Zum Link devices connect to Zum Net devices to provide in-room lighting control. Zum Link devices work together in a local ecosystem to provide customized solutions.
Zum Link Wired Technology
Zum Link technology enables in-room lighting control through keypads and sensors wired to controllers. Zum Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold separately) to RJ-45 ports to provide simple daisy-chaining and lighting control of compatible loads. The Zum Wired devices work together in a local ecosystem to provide customized solutions using the Zum app.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To reduce energy usage, lights turn off automatically when the room is vacant and dim gradually depending on the amount of natural daylight in the room.
DIN Rail Mounting
DIN rail Zum devices snap onto a standard DIN rail for installation in a wall mount enclosure (Crestron DIN-EN series or similar) or on a wall panel.
Override Contact Closure Input
An integrated contact closure provides the means to place all connected Zum Net and Zum Link devices into Emergency Override mode.
