Security Systems : Security Sensors : Crestron Electronics, Inc. - ZUMLINK-IR-QUATTRO-DLS-RLY

Zum Wired Infrared Presence Detector with Daylight Sensing, HVAC Control and Link Communication

Model: ZUMLINK-IR-QUATTRO-DLS-RLY

Ceiling-mount presence sensor
Passive infrared (PIR), ultrasonic, or dual-technology motion detection
360 degree coverage pattern
Fully digital circuitry for low cost and high reliability
Built-in closed loop daylight sensor

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

STEINEL™ presence detectors with Zum® Link wired communication are part of a system designed to provide sophisticated lighting control with simple installation. A wired solution for Zum commercial lighting systems, the Zum Link Presence Detectors communicate via CBL-CAT5E-ZUMLINK-P cable (sold separately) which allow for in-room device daisy-chaining to other Zum Link devices (such as the ZUMLINK-KP keypad or Zum Link load controllers). The presence detectors are equipped with daylighting capabilities to adjust the lighting based on natural light. The RLY presence detectors also have a three-wire output relay to connect to a relay-input capable device, such s an HVAC call system. The presence detectors mount directly to the ceiling or via a junction box (not included).

Ceiling-mount presence sensor
Passive infrared (PIR), ultrasonic, or dual-technology motion detection
360 degree coverage pattern
Fully digital circuitry for low cost and high reliability
Built-in closed loop daylight sensor
Control system communications the Zum® Link network
Compatible with Zum wired keypad
For the -RLY models, additional relays included for input- relay capable devices

Sensor Type - Other
Warranty - Yes
Spec Sheet available - Yes

Height: 4.73 in
Width: 4.73 in
Regulatory Compliance: UL
DC Voltage: 24 Volts
Color: White
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 0.03 Amps
Depth: 3.03 in
Control Output: 1A at 30VAC/VDC
Coverage: 360° square mechanically scalable detection zones
Sensors: single infrared pyroelectric detector
Sensing: Passive Infrared (PIR)
Light Level Setting: 10-1000lux/1-100 fc
Detection Zones: Presence: Minor motion as described by NEMA WD7; Maximum: 15 x 15 ft (225 sq ft) Radial: Motion either directly toward or away from the sensor; Maximum: 15 x 15 ft (225 sq ft) Tangential: Motion perpendicular to the sensor; Maximum: 23 x 23 ft (529 sq ft)
LED: (3) Blue LEDs on the sensor head frontplate, Flashes upon start up and when triggered to identify itself
ZUMLINK: (2) RJ-45 orange ports; In-room Zum Link device daisy-chaining
Output Relays (Relay models only): (1) Green: Normally open, (1) Blue: Normally closed, (1) Red: Common
Material: Plastic
Mounting: Mount directly in the ceiling, 4 inch Square or round junction boxes (not included) or 3 inch mud rings (not included)

Sensor 1472742 kb - Data Sheet

Project List

Find a Dealer