hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Crestron Electronics, Inc. - ZUMLINK-DIN-DIMU
Crestron Electronics, Inc. - ZUMLINK-DIN-DIMU Crestron Electronics, Inc. - ZUMLINK-DIN-DIMU Crestron Electronics, Inc. - ZUMLINK-DIN-DIMU Crestron Electronics, Inc. - ZUMLINK-DIN-DIMU
Request Quote
crestron-electronics

DIN Rail Universal Dimmer Module for Zum Lighting Control

Model: ZUMLINK-DIN-DIMU

  • ZumĀ® wired DIN rail single-channel universal lighting dimmer
  • Supports dimmable LED, incandescent, electronic lowvoltage, magnetic low-voltage, neon/cold cathode, and 2- wire fluorescent lighting loads
  • Zum Link in-room device daisy chaining
  • Zero-cross filter technology for reduced lamp flicker
  • Auto load-type detection
Compare
Project List
Product Info
Tech Specs
Documents

The ZUMLINK-DIN-DIMU is a single-channel universal dimmer and load controller designed to control a wide range of dimmable lighting load types. Using proprietary zero-cross filter technology, the ZUMLINK-DIN-DIMU provides superior immunity to power line noise, resulting in significant reduction of lamp flicker.

Energy-saving options, such as Zum link presence detectors or analog photosensors (sold separately) are available to enable daylighting, occupancy or vacancy sensing, integration, and centralized monitoring and management. Room setup can be accomplished quickly through the Zum app.

Auto-Detecting Universal Dimming

Under normal operation, the ZUMLINK-DIN-DIMU detects the connected load type and automatically selects the appropriate operating mode. Reverse phase (trailing edge) mode supports incandescent and electronic low-voltage load types, while forward phase (leading edge) mode supports LED, magnetic low-voltage, neon/cold-cathode, and 2-wire fluorescent load types. Center phase mode is also available, combining reverse and forward phase load control to address special cases. The operative mode is indicated by four LEDs on the front of the device: REV, FWD, CENTER, and AUTO.

Zum Link Wired Technology

Zum Link technology enables in-room lighting control through keypads and sensors wired to controllers. Zum Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold separately) to RJ-45 ports to provide simple daisy-chaining and lighting control of compatible loads. The Zum Wired devices work together in a local ecosystem to provide customized solutions using the Zum app.

Energy Efficiency

Occupancy sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To reduce energy usage, lights turn off automatically when the room is vacant and dim gradually depending on the amount of natural daylight in the room.

DIN Rail Mounting

DIN rail Zum devices snap onto a standard DIN rail for installation in a wall mount enclosure (Crestron DIN-EN series or similar) or on a wall panel.

  • ZumĀ® wired DIN rail single-channel universal lighting dimmer
  • Supports dimmable LED, incandescent, electronic lowvoltage, magnetic low-voltage, neon/cold cathode, and 2- wire fluorescent lighting loads
  • Zum Link in-room device daisy chaining
  • Zero-cross filter technology for reduced lamp flicker
  • Auto load-type detection
  • Forward, reverse, and center phase dimming modes
  • Extreme stability under noisy power line conditions
  • DIN rail mounted in a NEMA Type 1 enclosure
  • 3M wide DIN rail mounting
 
Request Quote