Horizon™ In-Wall Forward Phase Dimmer with infiNET EX® Wireless Communication, 120 VAC, White

The HZ-DIMEX is a Horizon™ in-wall forward phase dimmer that controls incandescent, magnetic low voltage, and tungsten-halogen loads. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.

NOTE: Faceplates are not included.

Integrated Keypad
Supporting up to five buttons, the HZ-DIMEX is configurable for a variety of applications. Because the dimmer is attached to the Crestron® network, it can function as a keypad to trigger remote actions or as a switch for nondimmable loads.

Multiway Control
The HZ-DIMEX supports load control from multiple locations. Up to four HZ-KPEX or HZ-AUX devices can be connected to a traveler wire in a traditional three- or four-way circuit to dim the load attached to the HZ-DIMEX. The HZ-KPEX provides backlit, engravable button caps for multiway control, while the HZ-AUX provides a single large rocker button.

Multigang Expansion
Up to four devices may be installed side-by-side in a multigang electrical box with a compatible Horizon faceplate (HZ-FP-G series). All buttons in a multigang arrangement align to form one continuous control surface.

NOTE: Derating is required for multigang installations.

infiNET EX Communications
infiNET EX wireless technology provides two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.

The HZ-DIMEX communicates with a control system via a CEN-GWEXER or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network.

Field-Replaceable Button Caps
The preinstalled rocker button cap on the HZ-DIMEX is field replaceable, allowing for engravable multi-button configurations.