Lighting Control Systems : Dimmers & Dimmer Systems : Crestron Electronics, Inc. - GLXP-HSW12-LP

12-Channel High-Inrush Switch Module, Low Profile

Model: GLXP-HSW12-LP

12 channels of high-inrush power switching
Rugged, high-current latching relays
Arc-less switching
Supports 100-277 VAC applications
16 A, 1 HP load rating per channel

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Crestron® GLXP-HSW12-LP is a Crestron Green Light® switching module which features 12 independent channels of high-inrush power switching with rugged, high-current latching relays. Each channel is rated to control a 16 A lighting load or 1 HP motor.

Override Input

Send an override signal from the control system to set all output channels to their preset override level. Override mode can also be triggered from the front-panel of the GLXP-HSW12-LP. Override levels can be adjusted and saved using the front-panel controls or via software.

Cresnet® Communications

The GLXP-HSW12-LP communicates with a Crestron control system using the Cresnet control network. A pair of Cresnet ports are provided on the GLXP-HSW12-LP to allow easy daisy-chaining of several Crestron devices.

12 channels of high-inrush power switching
Rugged, high-current latching relays
Arc-less switching
Supports 100-277 VAC applications
16 A, 1 HP load rating per channel
Phase-independent channels
Cresnet® communications
Redundant power capability-module powered via line or Cresnet
Front-panel controls for testing and verification
Local and remote override capability
Low-profile design
Non-volatile power failure memory
Mounts in a GLEX Series lighting enclosure

Warranty - Yes
Spec Sheet available - Yes

DC Voltage: 24 Volts
Active Power: 5 Watt
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 277 Volts
Certifications: CE, IEC, UL
Current Draw: 16 Amps
Depth: 3.07 in
Height: 11.07 in
Width: 9.50 in
Product Weight: 7.50 lbs
Load Ratings:
•Dimmer Channels: 12
•Per Channel: 16 A at 100-277 VAC, 50/60 Hz; 0.5 HP at 120 V, 1 HP at 230 V, 1 HP at 277 V
•Dim Load Types: 0-10 V fluorescent ballast or LED driver (4-wire); 60 mA max current sink
•Switch Load Types: Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, high-intensity discharge (HID), motors
•Relay Lifetime: 1,000,000 on/off operations at full electronic ballast load
Connectors:
•NET: (2) 5-pin headers
•N1: (1) Terminal block; Line input neutral; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•L1-L8: (8) Terminal blocks; Line power inputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•SW1-SW8: (8) Terminal blocks; Switch channel outputs; Accepts 10-14 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (-): (1) 8-position terminal block; Dim channel common; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
•0-10V DIM (+): (1) 8-position terminal block; Dim channel output; Galvanically isolated; May be wired as Class 1 or Class 2; Accepts 12-28 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
Controls and Indicators:
•NET ID: (2) 7-segment green LED digits and (2) miniature push buttons, sets Cresnet ID; Digits display output levels during local control
•SETUP: (1) Red LED and (1) recessed miniature push button, enables setup mode and touch-settable ID
•OVR: (1) Red LED and (1) miniature push button, enables override mode and saves presets
•PWR: (1) Green LED, indicates power status; Solid illumination indicates line power is applied to N1 and L1; Flashing indicates Cresnet power is supplied in absence of line power
•NET: (1) Yellow LED, indicates communication with control processor
•RESET: (1) Recessed miniature push botton, resets internal processor
•ON/OFF: (8) Red LEDs and (8) miniature push buttons, manually activates individual channels for dimming
Humidity: 10% to 90% RH (noncondensing)
Heat Dissipation: 160 BTU/Hr
Construction: Mounts in a GLEX series enclosure using integral mounting flanges

Switch Module 766092 kb - Data Sheet

Project List

Find a Dealer