Power Supplies : Related Power Supply Products : Crestron Electronics, Inc. - FT2A-UTK-PWS

Power Supply for FT2 ELEC Series FlipTop

Model: FT2A-UTK-PWS

Part #: 6509647

Designed for use with a Crestron FT2 ELEC series FlipTop™
Single power supply is included with each FlipTop
Maximum of two power supplies may be connected to a single FlipTop

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Designed for use with a Crestron FT2 ELEC series FlipTop™. One is included with each FlipTop, and a second may be purchased as required to support installations using two USB Rapid Charging Modules.

Overview:

The FT2A-UTK-PWS is a power supply designed for use with a Crestron FT2 ELEC series FlipTop™. A single power supply is included with each FlipTop. A second power supply may be purchased separately when required to support more than one (but not more than two) USB Rapid Charging Modules (model FT2A-CHGR-USBA/C). Each FT2A-UTK-PWS includes a mounting bracket, which allows attachment of the power supply to the FlipTop chassis beneath the table. A maximum of two power supplies may be connected to a single FlipTop.

Designed for use with a Crestron FT2 ELEC series FlipTop™
Single power supply is included with each FlipTop
Maximum of two power supplies may be connected to a single FlipTop

UL Rated - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Certifications: UL,CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2.50 Amps
DC Voltage: 24 Volts
Depth: 1.57 in
Height: 4.91 in
Width: 2.21 in
Connections - Line: 1x IEC 60320 C7 main power inlet, Mates with removable power cord, included
Connections - Load: 1x 6ft (1.83m) attached cable with 2.1 x 5.5mm DC power barrel connector, Center pin +
Composition: Plastic, black, includes mounting bracket
Mounting: •Attaches beneath the table to mounting slots on the front, left, or right side of the FlipTop chassis•Requires approximately 10 inches (254mm) minimum vertical clearance beneath the top surface of the table•Projects 1.57 inches (40mm) from the front or side of the FlipTop chassis beneath the table (requires an additional 0.2 inch or 5 mm for installation)

CBLRA-INSERT-BLANK - Blank Spacer Insert for Cable Retractor Mounting Brackets

FT2-700-ELEC-PTL-AL - FlipTop FT2 Series Cable Management System, 700 Size, Electrical, Pass-Through Lid, Alloy

FT2-700-ELEC-PTL-B - FlipTop™ FT2 Series Cable Management System, 700 Size, Electrical, Pass-Through Lid, Black

FT2-700-MECH-PTL-AL - FlipTop FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid, Alloy

FT2-700-MECH-PTL-B - FlipTop FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid, Black

Power Supply 1963552 kb - Other

Project List

Power Supply 89574 kb - Other

Project List

Request Quote

Find a Dealer

Thank you!

Someone will be in touch with you shortly.

Contact Us

close

Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
United States
201-767-3400
www.crestron.com

Contact in regards to this product:

Crestron Electronics, Inc.

Model: FT2A-UTK-PWS

Installation Needed

Request more information from a dealer near you

close

Request more information from a dealer near you

About Us

Contact Us

Join AV-iQ

My-iQ Login

AV-iQ US

AV-iQ Europe

AV-iQ AU

CEPro-iQ

Newsletter Subscriptions:

AV-iQ

Commercial Integrator

CE Pro

Mobile View

© 2024 Emerald X, LLC. All rights reserved.

ABOUT CAREERS AUTHORIZED SERVICE PROVIDERS DO NOT SELL MY PERSONAL INFORMATION TERMS OF USE PRIVACY POLICY