The Crestron® CLCI-MCEX-W is a single-channel bidirectional motor controller capable of controlling 230V window shutters, shades, projection screens, lifts, and other equipment. Its ultra-slim design allows it to be installed in the ceiling, either next to or near the motor. The CLCI-MCEX-W communicates with the Crestron control system using infiNET EX® wireless technology, making it perfect for both new and retrofit applications.
The CLCI-MCEX-W installs inline without requiring special wiring and can be controlled via a standard light switch.
Bidirectional Motor Control
The CLCI-MCEX-W supports control of bidirectional motors. Two sets of screw terminals enable easy wiring to the motor for open and close control.
Easy Loop-Thru Wiring
The CLCI-MCEX-W is powered using a set of high-voltage screw terminals and has a second set of terminals that are wired in parallel to easily daisy-chain additional CLCI-series devices. This provides a fast, clean installation when deploying multiple CLCI- devices and eliminates the need for additional wire connectors or extra gang boxes. In some retrofit applications, this lets you create more zones from what was originally wired.
Out-of-the-box Control via Standard Switch
The CLCI-MCEX-W provides built-in support for applications that require basic load control using a cost effective maintained or momentary switch to control the load. Use a maintained or momentary switch to perform basic open and close control.
Complete Crestron Control
A Crestron control system connection allows the CLCI-MCEX-W to be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion® software for a complete solution to effectively manage energy.
Simple Setup
Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
