DescriptionThe patented EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized!
For best termination results, use our Heavy Duty Crimping Tool so that the conductors will be cut evenly and make full contact with the pins.
Note: Available as (1) piece or packs of (50) or (100) pieces.
Specifications
- For use in CAT6 compliant data networks.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- EZ to verify wire sequence. Simple one piece design...no bars or liners.
- Works with solid or stranded wire.
- Faster terminations with reduced scrap.
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
- TAA Compliant
Applications
RJ45 is a standard type of connector for network cables, which is usually used for data transmission. RJ45 connectors are most commonly found in applications such as to connect computers onto Ethernet based networks.
