Network Equipment : Network Hubs & Switches : Cleerline Technology Group - SSF-1x4POE-RUGGED

Industrial 1xSFP to 4xRJ45 Gb Switch with PoE+

Model: SSF-1x4POE-RUGGED

DC power input block 48-52V
Rugged IP40 rated metal casing, DIN rail bracket
Store and Forward switching mechanism
Reversed power polarity protection
Auto-Negotiation & Auto MDI/MDI-X on every RJ45 port

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Convert from fiber to Ethernet with the SSF-1x4POE-RUGGED, a 4 port Gigabit Ethernet 10/100/1000Base-TX to 1000Base-X non-managed Industrial Ethernet PoE+ PSE Switch. Offering PoE+ (30W per port), with a total power budget of 120W, this switch is a strong solution for extreme environments.

The unit’s case is rated for use in temperatures from -40 to +75°C. Additionally, the rugged metal housing’s IP40 rating allows the SSF-1x4POE-RUGGED to operate in mechanical and electric extremes.

This switch has 6kV surge protection per port and is complaint with IEC and EN standards for industrial grade equipment.

DC power input block 48-52V
Rugged IP40 rated metal casing, DIN rail bracket
Store and Forward switching mechanism
Reversed power polarity protection
Auto-Negotiation & Auto MDI/MDI-X on every RJ45 port
Supports 6kV surge protection per port on all TP ports
Supports IEEE 802.1Q Tag VLAN pass thru
Redundant DC power inputs on every model
120W total PoE power budget: 30W 802.3af/at per port

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: EMI, CE EN, FCC, EMS, NEMA-TS2, IEC
Number of Ports: 5
Active Power: 125 Watt
DC Voltage: 52 Volts
Depth: 3.46 in
Height: 4.72 in
Width: 1.38 in
Product Weight: 0.93 lbs
Warranty (Length/Type): 2 Years
Sustainability Rating: IP40
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 to 85 °C
Housing: Rugged Metal, IP40 Protection
Installation Mounting: DIN Rail mounting or wall mounting
Power Supply: External power supply required
IEEE Standard: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX and 100Base-FX, Fast Ethernet, IEEE 802.3ab 1000Base-T and 1000Base-X, Gigabit Ethernet, IEEE 802.3x Flow Control and Back Pressure
Switch Architecture: Back-plane (Switching Fabric): 20 Gbps
Data Processing: Store and Forward
Flow Control: IEEE 802.3x flow control, back pressure flow control
Provides Broadcast Storm Protection: Present
MAC Address Table: 4K
Packet Buffer Size: 1MB
Ports: 4 x RJ-45, 1 x 1000Base-X SFP slot, 10/100/1000Base-TX auto negotiation speed, Auto MDI/MDI-X function, Full/Half duplex
Network Cable: 10Base-T: 2-pair UTP/STP Cat.5 cable, 100Base-TX: 2-pair UTP/STP Cat. 5 cable, 1000Base-T: 4-pair UTP/STP Cat. 5e cable, EIA/TIA-568 100-ohm (100m)
Protocols: CSMA/CD
LED: Per unit: PWR (Green), LNK/ACT (Green - Fiber port status and activity) Per Port: Link/Active (Green), Speed/100 (Yellow)
Reverse Polarity Protection: Present
OVERLOAD CURRENT PROTECTION: Present
PoE Specs: PoE+ PSE device: IEEE 802.3af/at, up to 30W per port 120W total PoE budget
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A at 24VDC, NC
Removable Terminal Block: Provide 2 Redundant power, Alarm relay contact, 6 Pin

Switch 506141 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

DM NVX Director Network AV Switching Appliance, 80 Endpoints

by Crestron Electronics, Inc.

24-Port Gigabit Ethernet PoE+ Smart Switch w/ optional Remote/Cloud Management and 2 SFP Ports (380W)

by NETGEAR AV

10P MG U60 POE++ Smart Pro Switch

by NETGEAR AV