Professional Audio DSP Mixer

Model: CONVERGE Pro 2 128SRD

Part #: 910-3200-101-D

Powerful Architecture:
12 Mic/Line inputs
Built-in DanteTM for networked audio
Reduced footprint and power consumption
Audio Signal Processing:

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

CONVERGE Pro 2 is the industry’s most advanced professional audio DSP platform for conferencing and sound reinforcement applications. It outperforms in any size room, audio environment, and application. The 128SRD model mixer has 12 inputs, 8 outputs, USB audio; GPIO, RS232, IP control interfaces; P-Link and C-Link expansion buses; and DanteTM digital audio interfaces. The CONVERGE Pro 2 128SRD is optimized to work with the new DIALOG® 20 2-Channel Wireless Microphone System through its native connection.

Powerful Architecture:
12 Mic/Line inputs
Built-in DanteTM for networked audio
Reduced footprint and power consumption
Audio Signal Processing:
Acoustic Intelligence for better audio
DARETM feedback elimination
Advanced microphone gating
Scalable Connectivity:
Standalone and daisy-chained system
Stack up units up to 144 Mic/Line inputs
Expansion bus “C-Link” with 64 channels
“P-Link” bus to connect peripheral devices
Applications:
Sound Reinforcement applications
DanteTM for audio networking
Dialer app for Windows, Mac, iOS, Android
Touch Panel Controller with tabletop and wall mount options
3rd-party control modules:
Configuration and Management Flexible Control Options:
New CONSOLE® software
Auto-discovery of devices
MatrixViewTM for entire system
FlowViewTM for visualized audio signal paths
System monitoring and troubleshooting

Dante Enabled - Yes
Spec Sheet available - Yes

Mic/Line Inputs and Outputs:
•Inputs: Balanced audio inputs, 3.81mm Orange color
•Phoenix/Euroblock type male header, Push-on mini-terminal block
•Outputs: Balanced audio outputs, 3.81mm Black color
•Phoenix/Euroblock type male header, Push-on mini-terminal block
•EIN (Equivalent Input Noise):
•20kHz BW, max gain, Rs = 150ohm, -126dBu
•THD + N (Total Harmonic Distortion + Noise):
•20Hz – 22kHz at +4dBu, line level, 0.006%
•20Hz – 22kHz at -56dBu, mic level, <0.04%
•Dynamic Range:
•20Hz – 20kHz at 0dB, >105dB
•Crosstalk (Mic/Line):
•Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
•Input Impedance:
•Balanced (line to ground), 2.2kOHM, 1%
•Nominal Input Level:
•Adjustable -56dB to 0dB, 7dB step coarse gain
•Maximum Input Level: -65dBu to 20dBu
•Phantom Power: 48V, Impedance 6.81kOHM
•Output Impedance:
•Balanced (line to ground), 95OHM, 1%
•Output Level:
•0dBu (Nominal), 20dBu (Max), -40dBu(Selectable)
Ethernet:
•Port Type:
•RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
•IP Address: Ipv4 (Ipv6 Upgradeable Through Future S/W, F/W Upgrade)
Dante™ Audio:
•Port Type: RJ-45 Gigabit Ethernet connectors for Primary and Secondary Ports
•Audio: Digital Audio, 16 x 16 bidirectional channels
•Sample Rate: 48kHz / 96kHz
•Sample Bit Depth: 24-Bit
C-Link Expansion Bus:
•Ports Type: RJ-45 (Cat5e or Cat6)
•C-Link In & Out: Proprietary Expansion Bus
•Audio: 64 Expansion channels
•Cable: Solid core, factory terminated Cat 5e or 6 cable
•Distance: Up to 150’ (45M)
P-Link Peripheral Bus:
•Ports Type: RJ-45 (Cat5e or Cat6)
•P-Link In & Out: Proprietary Peripheral Bus
•PoE In:
•P-Link In Port
•PoE 802.3af Mode B, Midspan
•Power on “spare pairs” 4,5 and 7,8
•Input voltage range: 48V to 56V
•Audio: Up to 3 DIALOG 20 Wireless Receiver units + Up to 3 USB Expander units + Up to 3 GPIO Expander units
•Cable: Solid core, factory terminated Cat 5e or 6 cable
•Distance: Up to 200’ (60M)
RS232:
•Port Type: DB9 Female
•Settings: 9600/19200/38400/57600/115200 Baud;
•Serial Echo; Flow Control
•Support: Serial commands
GPIO:
•Port Type:
•5.08mm Green color Phoenix/Euroblock type male header
•Support: Control, Status, Variable Voltage Control
•Power Pin: 5V DC at 350mA Power Source
•Pin 1 to 4:
•Open Collector Outputs: 40VDC at 250mA
•Active Outputs (Source/Sink): 5VDC at 25mA
•Logic Inputs: 40.2kOHM pull up
•Variable Voltage Control Inputs: 5VDC max
•Ground Pin: GND
USB Control:
•Port Type: USB-B connector
•Location: Front Panel
•Compatible:
•USB 2.0
•USB 3.0
LEDs:
•Location: Front Panel
•Status LED:
•Off: Unit still initializing
•Blue - Fast Blinking: Stack Syncing in progress
•Blue - Slow Blinking: Unit not configured
•Blue - Solid: Configured unit
•Red - Fast Blinking: Stack Sync error
•Locate LED:
•Blue - Blinking: Unit “Locate” command received
•Power LED:
•Blue - Solid: Unit is powered on
Touch Sensor:
•Sensor Type: Capacitive Touch Button
•Location: Front Panel
Power and Thermal:
•Port Type: AC Inlet
•Thermal: 170 BTU/Hr Typical
Dimension and Weight:
•RU size: 1 RU
•Width x Depth x Height:
•Without rack-ears:
•17”W x 10.73”D x 1.72”H (43.2cmW x 27.3cmD x 4.4cmH)
Package:
•Power Cord: 6’ (1.8M), Grounded, Qty 1
•Input Connectors:
•Terminal Block Connector, 3 Position (Orange), Qty 12
•Output Connectors:
•Terminal Block Connector, 3 Position (Black), Qty 8
•GPIO Connector:
•Terminal Block Connector, 6 Position (Green), Qty 1
•C-Link Cable:
•RJ-45 To RJ-45 Cable, 18” (45.7cm), Qty 1
•USB Cable: USB Type A to Type B, 6’ (1.8M), Qty 1
•Rack Ears: Pre-installed, Qty 2
•Screw/Washer Kit: Rack Decor, Qty 4
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 14 F
Maximum Frequency Response (Bandwidth): 22 kHz
Maximum Frequency Response (Bandwidth): 22000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 50 Watt
Depth: 10.73 in
Height: 1.72 in
Width: 19 in
Product Weight: 9.30 lbs
Shipping Weight: 13.80 lbs