6.5" 1000W Ribbon Line Array Surround Speaker

Series: LA

Model: LA5S

Part #: 145-132107-01

Christie exclusive single enclosure, parabolic line array design
6 x 6" ribbon drivers, plus 6 x 6.5" paper/Kevlar composite mid-bass drivers
Dramatically higher RMS to peak max SPL ratio than compression driver systems
Extremely wide, even coverage, with a typical variance of ± 6dB throughout the entire audience area
Approximately four times the optimal listening area than typical systems

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Christie® LA5S is the optimum solution for premium surround audio in large theaters. Purpose-built for cinema, it combines advanced ribbon driver technology with a unique parabolic line array design in a single compact articulated cabinet. Providing perfect timbre matching with our Christie LA series speakers, the Christie LA5S features greatly enhanced clarity, dramatically reduced distortion and ultra-fast transient response. The extremely low mass of the ribbon drivers allows Christie LA5S to respond very quickly to signals. This eliminates the effects of high frequency breakup and power compression while enabling extended high frequency response and the accurate reproduction of the original source material.

Christie exclusive single enclosure, parabolic line array design
6 x 6" ribbon drivers, plus 6 x 6.5" paper/Kevlar composite mid-bass drivers
Dramatically higher RMS to peak max SPL ratio than compression driver systems
Extremely wide, even coverage, with a typical variance of ± 6dB throughout the entire audience area
Approximately four times the optimal listening area than typical systems
Enhanced clarity and voice intelligibility of surround effects
Overhead rated with integrated mounting points
Limited five year warranty

Horizontal Symmetry - Yes
ISO 14001 Certification - Yes
ROHS Compliant - Yes
Vertical Symmetry - Yes
Warranty - Yes
Loudspeaker Setup - Rigged
Spec Sheet available - Yes

Speaker Diameter (Driver): 6.50 in
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 70 Hz
Minimum Frequency Response (Bandwidth): 0.07 kHz
Construction: 18mm marine plywood(Enclosure)
Coverage Horizontal: 120 degrees
Coverage Vertical: 60 degrees
Impedance: 6 ohm
Maximum SPL (Sound Pressure Level): 128 dB
Power Handling: 1000 Watt
Sensitivity: 99 dB
Active Power: 1600 Watt
Depth: 16.50 in
Height: 35.40 in
Width: 10.60 in
Net Weight: 56 lbs
Regulatory Compliance: WEEE
Warranty (Length/Type): 5 Years Limited
Power Handling:
- 1500W (IEC) long term
- 2000W (IEC) short term
System Type:
- Coaxial parabolic ribbon driver line array, 2-way passive, in a single vented enclosure
Driver Components:
- 6 x 6" ribbon drivers with Kapton diaphragm and Neodymium magnets
- 6 x 6.5" paper/Kevlar composite mid-bass drivers with Neodymium magnets
Crossover:
- Linear phase, 2-way passive, symmetric crossover @ 1.5kHz, 12dB/octave
Maximum SPL:
- 129.5dB (IEC) long term
- 131dB (IEC) short term
- 139dB peak
Input Connectors:
- Screw terminal barrier strip
Enclosure:
- Vented box alignment
- 18mm marine plywood
- Heavily damped and braced
- Rated for overhead applications
Mounting Options:
- Wall or ceiling mounted using 4 x M8 points
- Flown using 3 x M10 fly points
Accessories (optional):
- Allen Products MM-120
- Omnimount 120.0ST-MP

LA3C - 3.5" 600W Ribbon Line Array Ceiling Surround Speaker

LA4S - 6" 600W Ribbon Line Array Surround Speaker

Speaker 501 kb - Data Sheet

Project List

Line Array Speaker 46 kb - Instructions

Project List

Line Array Speaker 2065 kb - Brochure

Project List

Find a Dealer

Find a Distributor