Mid/High Frequency Loudspeaker, 90°(H) x 40°(V) Nominal Dispersion, White

Series: LT

Model: LT 9400 (White)

Part #: 040187

90° x 40° coverage for short- to medium-throw applications in auditoriums, worship facilities, performing arts centers, stadiums and arenas
Mid/high-frequency loudspeaker designed for use in arrays with separate LF augmentation (Bose® MB12 or MB24 bass arrays) or voiceonly applications
Bose V2 midrange manifold sums output of 2 x 4.5"" (114 mm) extended-range cone drivers for lower breakup distortion and improved transient response
Provides a smoother, more natural vocal range compared to single 8"" to 12"" woofers
The LT 9400 loudspeaker utilizes a single Bose V2 midrange manifold

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Bose LT 9400 is a mid/high-frequency loudspeaker is designed for downfill applications with LT Coherent Zone arrays in medium to large permanent installations, or as the primary reinforcement source along with MB low-frequency loudspeakers in smaller arrays and venues. The large-format 90° x 40° waveguide provides precise coverage and high intelligibility, serving as a cost-effective alternative to multiple-cabinet line arrays for many applications.

90° x 40° coverage for short- to medium-throw applications in auditoriums, worship facilities, performing arts centers, stadiums and arenas
Mid/high-frequency loudspeaker designed for use in arrays with separate LF augmentation (Bose® MB12 or MB24 bass arrays) or voiceonly applications
Bose V2 midrange manifold sums output of 2 x 4.5"" (114 mm) extended-range cone drivers for lower breakup distortion and improved transient response
Provides a smoother, more natural vocal range compared to single 8"" to 12"" woofers
The LT 9400 loudspeaker utilizes a single Bose V2 midrange manifold
Bose large-format waveguide provides effective 90° x 40° pattern control to approximately 300 Hz (horizontal) and 1.5 kHz (vertical)
Minimizes loudspeaker overlap in arrays to reduce comb-filter interference and improve intelligibility
Suitable for indoor arenas, houses of worship, auditoriums and performing arts venues

Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 16 kHz
Impedance: 8 ohm
Maximum SPL (Sound Pressure Level): 124 dB
Depth: 22.60 in
Height: 25.20 in
Width: 24.10 in
Product Weight: 82 lbs
Shipping Weight: 96 lbs
Color: White
Maximum Frequency Response (Bandwidth): 16000 Hz
Minimum Frequency Response (Bandwidth): 190 Hz
Minimum Frequency Response (Bandwidth): 0.19 kHz
Coverage Horizontal: 90 degrees
Coverage Vertical: 40 degrees
Power Handling: 100 Watt
Sensitivity: 104 dB

100-watt Mid/High Loudspeaker 706 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

8-inch Two-way 100º x 100º Indoor/Outdoor Install Loudspeaker System, Black Finish

by Electro-Voice

XLD Full-range Cabinet, Fiberglass, 2 x 8", 2 x ND2, Biamp or Tri-amp Mode Switchable, 90° H/10° V, Integrated Rigging system, Black

by Electro-Voice

2 x 8" 2-way Full-range Line Array Module, 90° x 20° Coverage, Black

by Electro-Voice