Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-(4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately). *60W model with a large power reserve. *8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules. *Four priority levels. *4-ohm, 8-ohm, 25V, & 70V outputs. *Rack mountable w/ kit (sold separately).
- 5 models ranging from 35W to 250W each;
a mixer-only version (VMIX) is also available
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
(modules sold separately)
- 4 levels of priority between modules
- 2 module bays capable of handling plug-in signalprocessing output modules
- 11-segment LED?output level meter monitors the
output level of the power amplifier with Avg./Peak
meter switch
- Motorized master volume control can be remotely
operated
- Lockable switch permits user to select either
transformer-coupled outputs or a direct lowimpedance output
- 5-position barrier strip, with clamping washers,
provides connections for speaker loads
- Bridging In/Out connector
- External access to priority mute buses
- Bridging jack and Mute terminals join multiple
Power Vector amps and mixers together
- Independent volume control for each of the eight
module bays
- Two-color LED for each channel indicates input
signal or clipping
- Bass and treble control with bypass switch (located
in module bay 6)
- 125 Hz Low Cut switch (located in module bay 6)
- Signal-processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
- Pre-EQ, unbalanced, buffered output signal
(“post” all unit controls, but “pre” any external
“Insert” equipment connected)
- Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for
external equipment
- 8 module security cover/filler plates included with
amplifier (PVMC)
- Push-button remote volume control panel (Model
RVCP, sold separately)
- Security cover to selectively protect volume,
bass, and treble controls (Model PVSC, sold separately)
- Rack mountable (with rack mounting kit RPK87,
sold separately)
- 2 rack spaces high (3-1/2")
- Listed to UL Standard 60065 for U.S. and Canada
