Run color video up to 2200 feet (670.5 m) or black-and-white up to 2500 feet (762 m).
Eliminates bulky and expensive coax cable, so you can connect CCTV security equipment to UTP cable already installed in a building.
Compact enough to fit alongside a security camera, a video multiplexor, or another video device in a tight area.
The weather-resistant unit features BNC and screw terminal connections, a polarity identification label, and cable strain relief.
Why install a lot of new coax wiring when you want to add a security camera to your application? With this convenient video balun, you can use your existing UTP cabling instead!
Transmits CCTV video signals via a single UTP cable wired to a terminal strip.
Balun Type - CCTV
Balun Type - Video
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
32 F
Maximum Distance:
2500 ft
Certifications:
CE, FCC
Insertion Loss:
2 dB
Regulatory Compliance:
WEEE, TAA
Warranty (Length/Type):
Lifetime
Bandwidth:
DC to 8 MHz
Cable Requirements:
CAT3 or higher UTP: Solid copper, 24 gauge or lower
Impedance: 100 ohms; also works with standard audio with RCA connectors, and 75-ohm coax
Distance (Maximum) :
CAT5 UTP: Color: 2200 feet (670.5 m)
Black-and-white: 2500 ft. (762 m)
Systems Supported:
NTSC, PAL, SECAM
Connectors:
(1) BNC M, (1) screw terminal
Power:
From the interface
RF Input (Maximum):
1.1 volts at 60 Hz
Common-mode Rejection:
Greater than 40 dB over the frequency range