Signal Processing Systems : Decoders & Encoders : Barix - Barix Exstreamer 500

Professional multiformat network audio encoder/decoder

Model: Barix Exstreamer 500

G.711, G.722, PCM Encoding
MP3 Encoding (low Latency)
Shoutcast/Icecast Source capability
Audio Level Supervision with SNMP Trap generation
IP Streaming via TCP, UDP, RTP, Multicast

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Exstreamer 500 devices are universal IP Audio codecs, which can encode and decode analog audio feeds. Supporting a large number of protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio as well as VoIP applications.

Applications

Live IP Audio Encoder for Streaming Applications
Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
Paging and Audio Distribution with Amplifier control and monitoring
Shoutcast/Icecast Source Encoder
Internet Radio Receiver
Confidence Monitoring and Vox Switch for Broadcast Applications
Commercial Audio Streaming Applications
Multiroom IP Audio System Receiver
Low latency IP Audio Encoder for multichannel applications
Background Music and Music-on-Hold encoder for VoIP Applications
Source Encoder for IP Audio Distribution Applications
Digital Annunciator, Message Player, Message Repeater
SIP and IP Paging Zone Device

G.711, G.722, PCM Encoding
MP3 Encoding (low Latency)
Shoutcast/Icecast Source capability
Audio Level Supervision with SNMP Trap generation
IP Streaming via TCP, UDP, RTP, Multicast
Balanced Line Level Input (Stereo)
Balanced Line Level Output (Stereo)
Relay Output (4)
Contact Closure Input (4)
RS-232 Serial Port / RS-485
Power Supply (24V, included)
USB Flash Memory Interface
AES/EBU digital Audio interface (Ex1000 only)

Spec Sheet available - Yes
Spec Sheet available - Yes

Certifications: FCC A, CE A, RoHS compliant (lead free)
Electrical:
- 24 to 48 VDC ± 20%
- Power requirement: 8 Watt max.
- 2 pin screw terminal connector
  
  Ethernet
  - 10/100Mbps auto,
  - RJ-45 connetor with
- RS-485:
  - 4 pin screw terminal connector
  - 300..230'400 Baud asynchronous, 7/8 bit
- Analog Inputs & Outputs (stereo):
  - DB9 female socket
- Analog Inputs:
  - Differential input, 18kOhm input impedance
  - Clipping level 15dBu, 12.3 Vpp
  - Frequency response (-3dB) 20..20'000 Hz
  - Signal to Noise Ratio 87 dB, THD 0.01%
  - Stereo crosstalk -88 dB
  - Input level software controllable (-3.. +19.5dB)/p>
    Analog Outputs
    - Differential output, 40..60 Ohm output im
  - Audio Formats:
    - Encoding and decoding MP3 in variable and constant bit rate
    - ( VBR/CBR, 8kbps..320kbps) at 8..48kHz sample frequency
    - PCM (L16, uLaw, aLaw) at 8..48kHz sample frequency
    - Decoding AAC+ (AAC-LC, HE-AAC, HE-AAC v2)
  - Discrete I/O:
    - Two 6 pin screw terminal connectors
    - 4 contact closure sensing inputs
    - 4 relay contacts, 24V 0.5A, normally open
  - Mechanical:
    - Aluminum case, 620g, rack mountable using accessory bracket
  - Dimensions (W x H x D):
    - 216x38x125mm (8.5x1.5x4.92 inch)
  - MTBF:
    - According MIL217F at 25°C
    - Exstreamer 500 min. 410 000h
    - Exstreamer 1000 min. 350 000h
      
      depends on used codec, best results @48kHz PCM<

Barix AG Exstreamer500 V3. Data Sheet.pdf 1714 kb - Data Sheet

Project List

Barix_Product_sheet_Exstreamer_500_30.pdf 281 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

4K HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics

Modular, rackmount IP conversion platform: 2RU, 10-slot chassis for Modator encoding and decoding modules (including NDI)

by Magewell Electronics