Stereo Hi Pass Mono Sum INFRA Processor

Model: INFRA-MXB

18 Hz INFRA dual integrator
INFRA Dynamic Filter
Balanced inputs
Internal frequency modifications
Convenient front panel controls

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Bag End INFRAMXB system module is a two-channel loudspeaker controller designed for stereo 2-way operation with a mono sum INFRA low frequency output. The INFRA-MXB incorporates the INFRA dual integrator, frequency dividing, and system protection in an easily operated configuration where the system parameters are internally preset or available on front panel rotary controls.

18 Hz INFRA dual integrator
INFRA Dynamic Filter
Balanced inputs
Internal frequency modifications
Convenient front panel controls

Amplifier Signal Type - Audio
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Current Draw: 0.20 Amps
DC Voltage: 15 Volts
Depth: 5.25 in
Height: 1.75 in
Width: 19 in
Product Weight: 5 lbs
Shipping Weight: 7 lbs
Input Connectors: XLR female
Input Configuration: Balanced
Alternate Input Configuration: Unbalanced
Maximum Input Signal: 4.5V (+16 dBu)
Output Connectors: XLR male
Output Configuration: Unbalanced
Maximum Output Signal: 4.5 V (+16 dBm)
Nominal Output Impedance: 50 Ohms
Power-on Indication: Green LED
Input Voltage Connector: Miniature DC 2.5 mm
Input Voltage Polarity: Center pin +
Maximum INFRA Gain: 10 dB
Maximum INFRA Attenuation: 10 dB
INFRA Cutoff Frequency Programming: Plug in resistors
INFRA Cutoff Frequency: 8 Hz to 40 Hz, Factory set 18 Hz
INFRA Output Mode: Sum in Stereo Mode
Nominal Dynamic Filter Threshold: 0 dBu Output
Minimum Dynamic Filter Threshold: -10 dBu Output
Maximum Dynamic Filter Threshold: +10 dBu Output
Maximum Dynamic Filter Reduction Capability at 18Hz: 30 dB
Dynamic Filter Threshold Exceeded Indication: Red LED
INFRA Circuit Noise: < -90 dBu (20 Hz to 20 kHz)
INFRA Dynamic Range: > 105 dB (20 Hz to 20 kHz) (bandwidth unweighted)
Maximum Hi Pass Gain: 10 dB
Maximum Hi Pass Attenuation: 10 dB
Hi Pass Filter Frequency Programming: Plug in resistors
Factory Set Hi Pass Filter Frequency: - 3 dB @ 130 Hz/-6 dB @ 97 Hz
Hi Pass Filter Frequency Range: 50 Hz to 200 Hz
Hi Pass Filter Slope: 12 dB/octave
Hi Pass Circuit Noise: < -85 dBu (20 Hz to 20 kHz)
Hi Pass Dynamic Range: > 105 dB (20 Hz to 20 kHz) (bandwidth unweighted)

Two-channel Loudspeaker Controller 235 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Vocia® VA-8600 Failover Module (VFOM-1)

by Biamp

6x6 Audio Distribution Amplifier

by Vanco International

30W, 2 Channel, In-Wall Addressable Bluetooth Amplifier

by Vanco International