Dante | AES67 Microphone Interface

Model: DN4

Compatible with all Audix RJ45-equipped, single-element, analog microphones
High-fidelity 24-bit, 48kHz audio
Balanced audio inputs with RFI filtering
48V phantom power output
Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Compatible with all Audix RJ45-equipped, single-element, analog microphones
High-fidelity 24-bit, 48kHz audio
Balanced audio inputs with RFI filtering
48V phantom power output
Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
All channels controlled independently
Flash memory prevents loss of settings in the event of power loss
Supports AES67 audio streams
Dante Domain Manager (DDM) ready
Dynamic or static IP address
Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications
Operates on PoE from any IEEE 802.3af compliant equipment
Applications:
Meeting rooms
Convention centers
Educational facilities
Houses of worship

Dante Enabled - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Depth: 4.92 in
Height: 1.11 in
Width: 7.95 in
DC Voltage: 48 Volts
Product Weight: 1.41 lbs
Certifications: FCC, CE, WEEE
Minimum Frequency Response (Bandwidth): 15 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 22000 Hz
Maximum Frequency Response (Bandwidth): 22 kHz
Signal to Noise Ratio: -96 dB
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 50 F
Frequency Response: 15Hz - 22kHz, +0, -3dB
Sample Rate: 48kHz
Phantom Power: 48VDC, 14mA / port (short circuit protected)
Mic Input: Balanced, RFI filtered
Input Impedance (Balanced): 1.15kohm
THD+N: (1kHz, 0dB gain) 0.003percent
Mic Input Connector: Shielded 8P8C, RJ45
Max Input: (0dB gain) -14dBu, 155mV
Word Width: 24-bit
CMRR (typ.): 50dB
EIN (typ., unweighted): -120dBu
SNR (typ., unweighted): -96dB
Channel Crosstalk(1kHz): < -80dB
Dante™ / AES67 Channels: 4
Dante™ Chipset: UXT-01-004
Logic Inputs Per Port: 1 per single-element microphone port
Logic Outputs Per Port: 2
Low-pass Options: Off, 5kHz, 7kHz, 10kHz
High-pass Options: 15Hz, 238Hz
Gain Options: 0dB, +8dB, +12dB, +15dB,+18dB, +24dB, 30dB,+36dB
External DC Jack: +48VDC, 125mA
PoE (IEEE 802.3af): CLASS 2 (3.84 - 6.49W)

ADX40 - Miniature Hanging Microphone

ADX60 - Cardioid Pre-polarized Boundary Condenser Microphone

DN43 - Dante | AES67 Microphone Interface for the Audix M3 tri-element microphone

GS1 - Flush mount wall cardioid mic with nickel finish. Mic can be rotated for directivity. 18-52 V phantom power.

LCB1 - Logic control button. Designed to remotely control the on-off function of a microphone (or other devices) when used in conjunction with a logic enabled media system.

M3 - Tri-element Hanging Ceiling Microphone

M3DK - Microphone and Interface Kit for the Dante | AES67 Integrated Microphone System

M3WHM - Tri-element Ceiling Microphone

M40 - Miniaturized Condenser Ceiling Microphone

M55 - Hanging Ceiling Microphone with Height Adjustment

M55WD - Hanging Ceiling Microphone for the Dante

M60 - Boundary Condenser Microphone with Integrated Circuitry

M65 - Tabletop Installed Microphone

M70 - Flush Mount High Output Ceiling Microphone for Distance Miking

M70WD - Flush-mount Ceiling Microphone for the Dante

Dante 359682 kb - Data Sheet

Project List