Microphones : Microphone Systems (Packages) : Audio-Technica U.S., Inc. - AT2035PK

Cardioid Integral 3-pin XLRM-type Streaming/Podcasting Pack

Model: AT2035PK

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

More Product Information Below

Compare

Project List

Product Info

Tech Specs

The AT2035PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2035 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable. The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement. The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate any noise, shock or vibration that's transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer.

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit
Full 360° rotation
Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
Internal cable management for clean desk appearance

Polar/Pickup Pattern - Cardiod

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 136 dB
Impedance: 120 ohm
Product Weight: 0.89 lbs

Find a Dealer

Find a Distributor

Suggested Products

ADECIA Ceiling Solution

by Yamaha Corporation

Biamp MRB-L-SCX400-T - Meeting room bundle; includes 1 Devio SCX 400, 1 Parle TTM-X (black), 1 Parle TTM-XEX (black), 1 AMP-450BP, 2 pair of Desono C-IC6 loudspeakers (white), (2) 25 ft plenum-rated Cat5e cable, (5) 10 ft (3m) plenum-rated Cat5e cable

by Biamp

Biamp MRB-M-X400-C - Meeting room bundle; includes 1 TesiraFORTE X 400, 1 Parle TCM-XA (white), 1 pair of Desono C-IC6 loudspeakers (white), 1 BPAK, (1) 25 ft (7.5m) plenum-rated Cat5e cable, (4) 10 ft (3m) plenum-rated Cat5e cable

by Biamp