TRA series power amplifier expands on SRA’s concept of right amp for job. These 2RU amplifiers utilize our state of the art technology to create advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. Four models available in two- and four-channel configurations, with power ratings of 75W and 150W per channel at 4 ohms, 70V and 100V. All audio controls of TRA-Series amplifiers are on rear panel or internal. Six-step LED meter for each channel lets you monitor all levels. All TRA amplifiers can drive four or eight ohm loads and 25V or 70V and 100V constant voltage lines simultaneously. Output transformers are internally mounted. 150W models are capable of driving 25V constant voltage lines using direct coupled 4 ohm output.
Convection cooling
Extremely low noise
Euroblock inputs
Euroblock outputs
Selectable input sensitivity
Remote power turn-on/off
Extensive protection circuitry
6-step signal level and clip LEDs
Level attenuators for each channel
Adjustable turn-on delay up to eight seconds
Internally mounted constant voltage transformers
Amplifier Type - Other
Amplifier Type - Power Amplifier
ROHS Compliant - Yes
Transformer Option - Yes
Must be Level - Yes
Loudspeaker Voltage - 25V
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
20 kHz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Must be Level:
Yes
ROHS Compliant:
Yes
Transformer Option:
Yes
Gain:
26, 36 dBu
Maximum Input Level:
+21 dBu
Damping Factor (8 ohms):
>200
Cooling:
Convection
Output Circuitry:
Class D
Cordset:
3-Prong IEC
Front Controls:
AC Power Switch
Input Sensitivity1 (75W), 4 (150W):
dBu
Internal HPF (switch):
80Hz (default), Off
Connectors (each channel):
Input: each channel 3- Pin Euroblock; Output: each channel Euroblock
Front indicators (LED color):
Power (Blue), Standby (Yellow), Protect (Red), Clip (Red)
Signal Level Front indicators:
–24dB, -18dB, -12dB, -6dB (Green), -3dB (Yellow), Clip (Red)
Warranty (Length/Type):
5 Years Limited
AC Voltage:
120 Volts
Active Power:
125 Watt
Current Draw:
1.98 Amps
Depth:
11 in
Height:
3.50 in
Width:
19 in
Shipping Weight:
35.50 lbs
Product Weight:
29.50 lbs
Impedance:
20000 ohm
Technology:
State of the art
25V Taps:
150 Watt
70V Taps:
150 Watt
100V Taps:
150 Watt
Certifications:
TUC, CE, FCC
Minimum Frequency Response (Bandwidth):
20 Hz
Maximum Frequency Response (Bandwidth):
20000 Hz
Signal to Noise Ratio:
105 dB
Number of Channels:
4
Number of Watts Per Channel:
150 Watt
Rack Units (Height):
2
ne8250pe
- 8-channel 250W Network Power Amplifier with Protea DSP
TRA-2075
- 2-channel 75W Professional Power Amplifier
TRA-2150
- 2-channel 150W Professional Power Amplifier