Audio Production Equipment : Amplifiers (Audio) : Ashly Audio, Inc. - nX 800

2U, 800W Multi-mode Amplifier

Series: nX

Model: nX 800

Protea™ DSP audio processing on inputs and outputs including
Automatic Feedback Suppressor
Auto-Mixer
Ambient Noise Compensation
Dynamics processing with auto-ducker

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

nXp amplifiers carry all nX and nXe features plus Protea DSP and swept load impedance analysis. These amps are designed to meet the most demanding live sound environments and fixed installation sound systems such as stadiums, arenas, performance venues, worship spaces and convention centers.

NX amplifiers are trust-worthy, power amplifiers that install and configure into virtually any architecture and sound environment.

NX Amplifiers feature Selectable Outputs on each channel so you can connect to virtually any speaker. Select Low Impedance (2, 4, and 8Ohm), or Constant Voltage (70V or 100V).

Protea™ DSP audio processing on inputs and outputs including
Automatic Feedback Suppressor
Auto-Mixer
Ambient Noise Compensation
Dynamics processing with auto-ducker
EQ and crossovers including FIR filters
Time alignment and tower delay
Scheduled noise-masking with Real-Time Clock
Swept AC load-analysis with baseline logging
FIR Filter capable, dynamics, gain, equalization, 2×4 or 4×4 matrix mixer, crossover, delay, metering, and signal generator functions for test and noise masking applications
Precision swept load impedance monitoring of each amplifier channel
Ethernet Control and monitoring of amplifier functions, with front panel COM activity LED
Serial data port for use with Ashly remote control devices, or optional RS- 232 converter for third party controllers (INA-1)
Use Protea™ Software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
Real-Time Clock with Event Scheduler
Instant Standby Mode 30% reduction in power consumption with on/off and Preset Recall, both via contact closure, software control, or event scheduler
Programmable power-on delay
Aux preamp outputs, and fault condition logic outputs
Optional Cobranet™ or Dante® and AES3 digital audio input with passthru
Rear panel DIP switches select low impedance (2, 4, and 8Ohm), constant voltage (70V or 100V), high pass filter, limiter and input gain on each channel
Ashly Energy Management System (EMS) for increased efficiency) automatic
Switch mode power supply automatically detects 120V or 240V AC operation
Extensive protection circuitry
Continuously variable cooling fans
Front panel power switch and level controls (can be disabled for security)
Multiple internal power supplies provide increased channel separation and reliability
Remote DC level control on each input channel (2RU models only)
Genuine Neutrik® connectors on 2 RU models for security, safety, and reliability
Safety / Compliance: cTUVus, CE, FCC, RoHS

Amplifier Type - Power Amplifier
Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Depth: 16.84 in
Height: 3.50 in
Impedance: 10000 ohm
Width: 19 in
Warranty (Length/Type): 5 Years
Certifications: cTUVus, CE, FCC
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Total Harmonic Distortion + Noise (THD+N): 0.50 %
Rack Units (Height): 2
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Shipping Width (with packaging): 24.50 in
Shipping Height (with packaging): 22 in
Shipping Depth (with packaging): 5.25 in

nx 1502 - 2-channel 150W Multi-mode Power Amplifier with Selectable Outputs

nx 1504 - 4-channel 150W Multi-mode Power Amplifier with Selectable Outputs

nX 752 - 2-channel 75W Multi-mode Power Amplifier with Selectable Outputs

nx 754 - 4-channel 75W Multi-mode Power Amplifier with Selectable Outputs

nX1.52 - Power Amplifier: 2 x 1,500 Watts @ 2 Ohms, 2 x 1,500 Watts @ 4 Ohms, 2 x 1,500 Watts @ 70V

nX1.54 - Power Amplifier: 4 x 1,500 Watts @ 2 Ohms, 4 x 1,500 Watts @ 4 Ohms, 4 x 1,500 Watts @ 70V

nX3.02 - Power Amplifier: 2 x 3,000 Watts @ 2 Ohms 2 x 2,000 Watts @ 4 Ohms 2 x 2,450 Watts @ 70V

nX3.04 - Power Amplifier: 4 x 3,000 Watts @ 2 Ohms 4 x 2,000 Watts @ 4 Ohms 4 x 2,450 Watts @ 70V

nX4002 - Power Amplifier: 2 x 400 Watts @ 2 Ohms 2 x 400 Watts @ 4 Ohms 2 x 400 Watts @ 8 Ohms 2 x 400 Watts @ 70V

nX4004 - Power Amplifier: 4 x 400 Watts @ 2 Ohms 4 x 400 Watts @ 4 Ohms 4 x 400 Watts @ 70V

multi-mode 1115259 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.