Audio Production Equipment : Amplifiers (Audio) : Ashly Audio, Inc. - ne8250pe

8-channel 250W Network Power Amplifier with Protea DSP

Series: ne

Model: ne8250pe

10/100 Ethernet comes standard for remote control and monitoring
FIR Filter capable (with DSP)
Low-Z, 25V, 70V, 100V models
Protea DSP, AES3, CobraNet® and Dante® input options
DC voltage remote gain control

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

These NE Series Amplifiers are uniquely designed around an energy efficient Class-D platform with a switching power supply. Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
The NE Series amplifiers are offered in two separate platforms-the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor. Each can be customized for any installation by adding your choice of AES3 inputs, mic pre inputs or a Dante™ or CobraNet™ card. NE Multi-Channel amplifiers are also offered with 240V Line Voltage in either Low-Z or 100V constant voltage output models for International customers.

10/100 Ethernet comes standard for remote control and monitoring
FIR Filter capable (with DSP)
Low-Z, 25V, 70V, 100V models
Protea DSP, AES3, CobraNet® and Dante® input options
DC voltage remote gain control
Switched-mode power supply, Class-D output
Stepped, calibrated input attenuators
Remote power standby
Disable all front panel controls via software
Temperature sensitive variable speed fan with side-to-front airflow
Selectable HPF frequencies (80Hz, 400Hz, off) on 25V, 70V, and 100V models
4-stage level meters
Output current and temp indicators

Amplifier Type - Power Amplifier
Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 120.20 F
Operating Temperature (Minimum): 39.20 F
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Certifications: CE, FCC
Number of Channels: 8
Power Handling: 250 Watt
Sensitivity: 7.20 dBV
Signal to Noise Ratio: 107 dB
Total Harmonic Distortion + Noise (THD+N): 0.50 %
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 120 Volts
Depth: 16.84 in
Height: 3.50 in
Width: 19 in
Product Weight: 24.70 lbs
Shipping Weight: 30.80 lbs
Warranty (Length/Type): 5 Years

KLR-2000 - 2-channel 2000W High Performance Power Amplifier

KLR-3200 - 2-channel 3200W High Performance Power Amplifier

KLR-4000 - 2-channel 4000W High Performance Power Amplifier

KLR-5000 - 2-channel 5000W High Performance Power Amplifier

nXp 1502 - 2-channel 150W Multi-mode Power Amplifiers with Selectable Outputs and Protea DSP

nXp 1504 - 4-channel 150W Multi-mode Power Amplifiers with Selectable Outputs and Protea DSP

nXp 752 - 2-channel 75W Multi-mode Power Amplifiers with Selectable Outputs and Protea DSP

nXp 754 - 4-channel 75W Multi-mode Power Amplifiers with Selectable Outputs and Protea DSP

nXp1.52 - Network Power Amplifier with DSP: 2 x 1,500 Watts @ 2 Ohms 2 x 1,500 Watts @ 4 Ohms 2 x 1,500 Watts @ 70V

SRA-2075 - 2-channel 150W Class D Professional Power Amplifier

SRA-2150 - 2-channel 300W Class D Professional Power Amplifier

SRA-4075 - 4-channel 150W Class D Professional Power Amplifier

SRA-4150 - 4-channel 300W Class D Professional Power Amplifier

TM-335 - 35W Public Address Mono Power Amplifier

TM-360 - 60W Public Address Mono Power Amplifier

TRA-2075 - 2-channel 75W Professional Power Amplifier

TRA-2150 - 2-channel 150W Professional Power Amplifier

TRA-4075 - 4-channel 75W Professional Power Amplifier

TRA-4150 - 4-channel 150W Professional Power Amplifier

Amplifier 1244875 kb - Data Sheet

Project List

Amplifier 2845046 kb - Other

Project List

Find a Dealer

Find a Distributor

Suggested Products

Single Channel 100W 70/100V Amplifier with Mic Input

by Vanco International

6x6 Audio Distribution Amplifier

by Vanco International

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International