The ILC410 expands the InfinityLink video platform capabilities to include SMPTE standards-based video-over-IP transport for both DVB-ASI and SD-SDI formats.
Based on SMPTE 2022 standards for encapsulation and Forward Error Correction (FEC), the ILC410 enables SDI and ASI to be reliably transported across managed IP networks. The module is capable of transporting four channels (two in each direction) of DVB-ASI or SD-SDI over a gigabit Ethernet IP network connection. SDI video is transported in its entirety, including all ancillary data. ASI video streams from less than 20 Mb/s to over 200 Mb/s are supported and can be rate limited.
The ILC410 FEC enables the recovery of lost, errored, or delayed IP packets and can withstand burst outages in excess of 3 ms. Access to the IP network is through rear accessible, field replaceable SFPs either optically in WDM, CWDM, and DWDM wavelengths or electrically via an RJ-45 SFP.
- Single Module transceiver for SD-SDI and DVB-ASI over Gig-E
- Fully transparent carriage of SDI and SDTI including ancillary information
- DVB-ASI stream rates from <20 Mb/s to >200 Mb/s
- Supports 188-byte and 204-byte DVB-ASI packets
- Provisionable limits on bandwidth for DVB-ASI
- Four independent channels, two transmit, two receive
- Unicast or multicast IP video streams
- SMPTE 2022 standards based encapsulation and Forward Error Correction (FEC)
- FEC recovers lost, errored, or delayed packets
- Row and column FEC supported
- Withstands burst outages in excess of 3mS
- Optical budget to 34dB
- Front panel 75ohm monitor port
- Front and rear panel status LEDs
- Configure via HTTP or SNMP
- IL-Manager supports remote monitoring, configuration and firmware upgrades
