Signal Processing Systems : Decoders & Encoders : AMX - NMX-ENC-N1133

Minimal Compression 1080p HD Video over IP Encoder with PoE, SFP and KVM

Series: N1000

Model: NMX-ENC-N1133

Part #: FGN1133-SA

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
1 Frame Latency-Same as HDBaseT
Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm applied applied to all resolutions
Optional Compression-Available option to disable all compression
Power Over Ethernet (PoE) -PoE eliminates the need for power supply

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

The new NMX-ENC-N1133 model features improved digital pixel reproduction and cut the already imperceptible latency in half. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly. It has separate HDMI and VGA/RGB inputs, supports PoE and has a separate SFP port. The SFP fiber path allows visually lossless video to be routed on a fiber-only network and extend signals beyond the reach of category cable. Added USB connectivity will enable users to extend USB over IP for touch-enabled and KVM applications.

The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a large 32×32 matrix switcher using off-the-shelf layer-3 network switches.

The ability to send IP Media for distribution using common managed network switches in any size and configuration makes N1000 solutions extremely flexible and easy to deploy.

COMMON APPLICATION

The NMX-ENC-N1133 is the perfect solution for any low-latency application and video matrix smaller than 32x32. Common applications include classrooms, conference rooms, performing arts, and sports bars.

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
1 Frame Latency-Same as HDBaseT
Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm applied applied to all resolutions
Optional Compression-Available option to disable all compression
Power Over Ethernet (PoE) -PoE eliminates the need for power supply
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unmatched Flexibility-Highly competitive pricing for matrices up to 32x32
Separate Inputs-Separate HDMI and VGA input connectors on the encoder
SFB Fiber/RJ45 Ports-Encoder features SFB fiber/RJ45 copper network ports with USB control inputs for KVM-over-IP keyboard and mouse operation
Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC
Input Signal Types: HDMI, DVI-D, RGB/VGA
Number of Channels: 2
Output (Decoded/Encoded) Signal Type: Ethernet
Video:
- Digital Video Input: HDMI, DVI-D (through adapter), RGB/VGA
- Analog Video Input
  - HD-15 VGA, Component
  - Component is supported through a passive adapter
- Video Output:
  - Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D
  - DVI-D is supported through a passive adapter
- Formats
  - HDMI, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
  - DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Progressive Input Resolutions
  - HDMI and DVI (Progressive)
    - Pixel clock between 27 MHz - 150 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1200
- Interlaced Input Resolutions
  - HDMI and DVI (Interlaced)
  - HD up to 1080i60
- Analog Input Resolutions
  - VGA
    - Pixel clock between 27 MHz - 165 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1200
  - Component: HD up to 1080p60
- Analog-to-Digital Conversation: 8-bit 165 MHz per each of three color channel
Audio:
- Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
- Output Signal Types: Ethernet
- HDMI Audio Formats: 8ch PCM
- Analog Audio Formats: Stereo 2-channel
- Analog-To-Digital Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency:
- Latency: <1 ms
Note: To calculate an end-to-end latency value, add the given Encoder latency (shown above) to your Decoder's latency (which is provided in the Decoder's Specifications sheet).
COMMUNICATIONS:
- Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
Ports:
- +12V 2A: One 12 Volt DC power input
- P0
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection, network AV video, and power to the Encoders and Decoders
- P1
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection
- IR:
  - 2-pin terminal Phoenix connector
  - Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232:
  - 3-pin terminal Phoenix connector
  - Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
CONTROLS AND INDICATORS-FRONT PANEL:
- RESET Button
  - Recessed pushbutton
  - Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
  - Recessed pushbutton
  - Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
  - On solid (green) when operating power is supplied (via PoE or local power supply)
  - This activity is also shown by the PWR LED on the rear panel
- STATUS LED
  - On flashing (green) when there is software activity
  - This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS-REAR PANEL:
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
POWER SUPPLY:
- Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; not included in shipment. NMX-ACC-N9312 (FGN9312)
- Power over Ethernet: Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port.
Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port.
Humidity: 10 to 90 % RH (non-condensing)
Heat Dissipation: Up to ~44 BTU/hr
General:
- Mounting Options
  - Stand alone, surface mount, wall mount, or rack mount
  - Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
  - Rack mounting requires one of the following (not included)
    - NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders
    - MX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
Warranty (Length/Type): 3 Years Limited
DC Voltage: 12 Volts
Current Draw: 2 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Depth: 5.50 in
Height: 1.05 in
Width: 7.80 in
Product Weight: 1.60 lbs

Encoder 387 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

Multi-format IP stream to HDMI decoding module for Modator chassis

by Magewell Electronics

Multi-format IP stream to HDMI/SDI decoding module for Modator chassis

by Magewell Electronics

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics