Signal Processing Systems : Decoders & Encoders : AMX - NMX-DEC-N3221

H.264 Compressed Video over IP Decoder with PoE

Series: N3000

Model: NMX-DEC-N3221

Part #: FGN3221-SA

Input and Output Scaling-Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Power Over Ethernet (PoE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

The N3000 Series H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders with the same seamless switching capability as the N1000 and N2000 lines. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI's commitment to provide unsurpassed Networked AV quality.

The N3000 Video over IP Series extends the reach of SVSI's Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.

H.264 decoder with expanded LocalPlay. Includes IR, serial, balanced audio, and two network ports (one POE). Digital video output only. H.264 decoder card with expanded LocalPlay, requires NMX-ACC-N9206 cage.

COMMON APPLICATIONS

The NMX-ENC-N3221 is the perfect solution for quality streaming over low bit rate WAN. Common applications include distance education, Multi-Site Enterprise, and IPTV Streaming.

Input and Output Scaling-Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Power Over Ethernet (PoE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability
Pass-Through DVI-DVI interface allows easy installation with local display such as desktop PC applications
Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: FCC, CE
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 5 in
Height: 1.05 in
Width: 7.89 in
Product Weight: 1.40 lbs
Regulatory Compliance: HDCP
Warranty (Length/Type): 3 Year Limited
Video:
- Digital Video Input: Network video over Ethernet via RJ45
- Video Output
  - DVI-D, HDMI
  - HDMI is supported through a passive adapter
- Formats
  - DVI-D, HDMI (through adapter), Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
  - HDMI and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Output Resolutions
  - HDMI and DVI (Progressive)
    - Pixel clock between 27 MHz - 150 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1080
Audio:
- Input Signal Types: Network video over Ethernet via RJ45 Output
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: Stereo 2-channel
- Analog Audio Formats: Stereo 2-channel
- Digital-To-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency:
- Latency: 170 ms
Note: To calculate an end-to-end latency value, add the given Decoder latency (shown above) to your Encoder’s latency (which is provided in the Encoder’s Specifications sheet).
COMMUNICATIONS:
- Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
- Network Stream
  - A/V Compression: H.264 video, AAC audio
  - Network Standards: MPEG-TS, RTP, RTSP, HTTP-live
Ports:
- +12V 2A: One 12 Volt DC power input.
- P0
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection, network AV video, and power to the Encoders and Decoders
- P1
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection
- IR: 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232: 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
- DVI-D OUT: DVI-D female; HDMI/DVI digital video/audio output. Allows for video and embedded digital audio output.
CONTROLS AND INDICATORS – FRONT PANEL:
- RESET Button
  - Recessed pushbutton
  - Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
  - Recessed pushbutton
  - Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
  - On solid (green) when operating power is supplied (via PoE or local power supply)
  - This activity is also shown by the PWR LED on the rear panel
- STATUS LED
  - On flashing (green) when there is software activity
  - This activity is also shown by the STAT LED on the rear panel
Humidity: 10 to 90 % RH (non-condensing)
Heat Dissipation: Up to ~44 BTU/hr
General:
- Mounting Options
  - Stand alone, surface mount, wall mount, or rack mount
  - Surface and wall mounting requires (not included)
    - NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
  - Rack mounting requires one of the following (not included)
    - NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders
    - MX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

Decoder 337 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

Modular, rackmount IP conversion platform: 2RU, 10-slot chassis for Modator encoding and decoding modules (including NDI)

by Magewell Electronics

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics

Multi-format IP stream to HDMI/SDI decoding module for Modator chassis

by Magewell Electronics