Signal Processing Systems : Decoders & Encoders : AMX - NMX-DEC-N1233

Minimal Compression 1080p HD Video over IP Decoder with PoE, SFP and KVM

Series: N1000

Model: NMX-DEC-N1233

Part #: FGN1233-SA

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
1 Frame Latency-Same as HDBaseT
Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm
Optional Compression-Available option to disable all compression
Power Over Ethernet (PoE) -PoE eliminates the need for power supply

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

The new NMX-DEC-N1233 model features improved digital pixel reproduction and reduces latency to an industry leading 10-ms for gigabit links. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly. It has separate HDMI and VGA/RGB inputs, supports PoE and has a separate SFP port. The SFP fiber path allows visually lossless video to be routed on a fiber-only network and extend signals beyond the reach of category cable. Added USB connectivity will enable users to extend USB over IP for touch-enabled and KVM applications.

The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a large 32×32 matrix switcher by connecting them directly to off-the-shelf layer-3 network switches.

The ability to send IP Media for distribution using common managed network switches in any size and configuration makes N1000 solutions extremely flexible and easy to deploy.

COMMON APPLICATION

The NMX-DEC-N1233 is the perfect solution for any low-latency application and video matrix smaller than 32x32. Common applications include classrooms, conference rooms, performing arts, and sports bars.

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
1 Frame Latency-Same as HDBaseT
Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm
Optional Compression-Available option to disable all compression
Power Over Ethernet (PoE) -PoE eliminates the need for power supply
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unmatched Flexibility-Highly competitive pricing for matrices up to 32x32
SFB Fiber/RJ45 Ports-Encoder features SFB fiber/RJ45 copper network ports with USB control inputs for KVM-over-IP keyboard and mouse operation.
Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC
Input Signal Types: Ethernet
Output (Decoded/Encoded) Signal Type: Embedded audio, HDMI
Video:
- Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port
- Video Output: HDMI, DVI-D (through adapter)
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support
- Output Resolutions:
  - HDMI and DVI (Progressive)
    - Pixel clock between 27 MHz - 165 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 1920 or a vertical resolution of 1200
Audio:
- Input Signal Types: Network video over Ethernet via RJ45
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
Latency:
- Latency: Latency is 10 ms for all unscaled resolutions. Scaling can add up to one frame (17 ms for 60 Hz or 33 ms for 30 Hz) of latency
Note: To calculate an end-to-end latency value, add the given Decoder latency (shown above) to your Encoder's latency (which is provided in the Encoder's Specifications sheet)
COMMUNICATIONS:
- Ethernet:
  - P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
  - P1: 10 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
Ports:
- +12V 2A: One 12 Volt DC power input
- P0
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection, network AV video, and power to the Encoders and Decoders
- P1
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection
- IR:
  - 2-pin terminal Phoenix connector. li> Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232:
- AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI IN: HDMI video output
- USB connectors (front panel): USB-B control input and two USB-A control inputs
CONTROLS AND INDICATORS-FRONT PANEL:
- RESET Button
  - Recessed pushbutton
  - Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
  - Recessed pushbutton
  - Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
  - On solid (green) when operating power is supplied (via PoE or local power supply)
  - This activity is also shown by the PWR LED on the rear panel
- STATUS LED
  - On flashing (green) when there is software activity
  - This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS-REAR PANEL:
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
POWER SUPPLY:
- Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; not included in shipment. NMX-ACC-N9312 (FGN9312)
Humidity: 10 to 90 % RH (non-condensing)
Heat Dissipation: Up to ~44 BTU/hr
General:
- Mounting Options
  - Stand alone, surface mount, wall mount, or rack mount
  - Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
  - Rack mounting requires one of the following (not included)
    - NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
    - NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
Warranty (Length/Type): 3 Year Limited
DC Voltage: 12 Volts
Current Draw: 2 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Depth: 5 in
Height: 1.05 in
Width: 7.80 in
Product Weight: 1.47 lbs

Decoder 335 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

Multi-format IP stream to HDMI decoding module for Modator chassis

by Magewell Electronics

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics

Modular, rackmount IP conversion platform: 2RU, 10-slot chassis for Modator encoding and decoding modules (including NDI)

by Magewell Electronics